Coin counter settings – Gimme Vending

There are a few settings adjustments needed to enable the Gimme Money Box Key to send data via Bluetooth to Gimme VMS.

If you have not installed and linked the Gimme Money Box Key, refer to the Money Room Key Set Up before adjusting the settings on your coin counter.

Featured coin counter is a Cummins JetSort, model 6601

Headers with *** denote required settings adjustments

Open the settings screen on your coin counter

*****************************

Enable Functions

This screen doesn't have any required adjustments, but here are the recommended settings:

END SUBBAT: AUTO
- This allows you to keep counting bags without having to end a batch every time a bag is counted

The settings for labels is required!
- Tap SELECT LABELS to enter LABEL SETUP

- - Locate C:
    - Tap [AUTO]
    - Next, tap Custom
      - If there is existing text, you can type to overwrite or use the CLEAR button on the keypad
        
        Enter BAG #
        
        Tap ENTER on the keypad
        
        If you tap EXIT on the screen without tapping the ENTER key on the keyboard, it will not save the C: label!
The rest of the settings are optional
- If you want to print a count receipt with more detailed information, you can add more labels for A:, B:, or D:

The PORT SET UP is important!

Tap PORT SETUP on the screen
Typically, coin counters have 8 ports located on the back of the machine
- The top row are ethernet ports and the bottom row are serial ports
  - The Money Box Key plugs into the bottom row of serial ports

You may use other ports IF they are set to PRNTR
- Any other devices connected to the machine with a port setting of COMM will interfere with relaying counting data from the coin counter to the Money Box Key
If you are not using any other ports, the screen should look like this